Products for Stone Industry

1. Water & Stain Repellent Impregnator Coatings – (2015)

It is an impregnating sealer for all stone products. It prevents the entry of liquids while still allowing the material to breathe. This sealer dries completely invisible. It makes the treated surface Water & Oil Repellent.

Apply to marble, granite and stone of all types. It is suitable for indoor and outdoor use. And it does not change color. Just wipe it on! If the stone gets wet you have coverage.

Example – Tenax Hydrex, Preserva Plus, etc.

IP Rights not with Bridgedots.
Commercialized – Yes.
2. Stone Color Enhancer Coatings– (2015)

It is a one component system. It is used to obtain a “wet” effect both for indoor and outdoor application. It brings out a deep rich color in stone and works excellent for matching the edge of the stone with the surface polish.

It can be applied on polished, flamed, rough or sanded surfaces. And it works well to disguise small scratches.

Example – Tenax Ager Color Enhancer and Sealer, Glaze and Seal, Duroshine.

IP Rights – With Bridgedots
Commercialized – By RachTR
3. Topical Sealer for Stones: (2016)
  • It is an acrylic based sealer that given excellent wet look and gloss to marble surfaces.
  • It forms a thin film on the marble surface.
  • It is used mainly on cladding and should be avoided in areas where foot traffic is there.
IP Rights – With Bridgedots
Commercialized – Yes.
4. Mastic Putty for Stones (2015)
Two Component System based on Unsaturated polyester resin .

It is mainly used for gluing and filling all types of marbles and natural stones and for filling holes and making joints on white marbles. It has strong adhesive properties, becomes hard and perfectly polishable after drying time.

Two Grades available – Low Viscosity and High Viscosity.

Example – Jolly Tixo, Tenax Mastic RX, Akemi Polysoft

IP Rights – With Bridgedots
Commercialized – Yes.
5. Polish Powder for Stones -2016

It is extensively used in polishing marbles and granite stones. Due to the wear and tear, the marbles loose their shine and look dull. To overcome this, we have our Polish Powder which fullfill the requirement and gets back the original shine of the marbles.

Features and Benefits:

  • Quickly achieves a mirror-like shine due to a combined chemical and mechanical action
  • Reduces water and dirt penetrability, thus facilitating daily cleaning and maintenance.
  • Intensifies the natural appearance of the stone.
IP Rights – With Bridgedots.
Commercialization – Yes
6. Liquid Polish for Stone – 2016

It is a transparent liquid silicone wax based product, used to increase the polishing effect on onyxes, marble, natural stones, granite, agglomerates, terrazzo. It is also used to brighten up the lost polishing effect. It can be used on the rough or brushed surfaces to obtain a semi-matt affect.

The product dries very quickly. The application may increase the polish from 7-6 to 19-20 point of gloss. The final film is very hard and with very good resistance to outdoor conditions. The classic product is a result of special waxes dissolved in solvent that allow a high penetration level on treated material leading to a long-lasting effect. The product can be used on proper automatic waxing machine.

IP Rights – With Bridgedots.
Commercialization – Yes
7. Products used in Industrial Processing of Stones -2018
• Block Reinforcement Adhesive
  • BA50 IN is epoxy based adhesive for providing reinforcement of marble blocks during processing.
  • BA50 IN is applied manually on four sides of the block with a fiber glass sheet.
  • It has excellent spread ability and sag resistance
  • It has excellent grip and adhesion strength
  • It cures even at low temperatures.
• Very Low Viscosity Epoxy for Granite
  • RachTR SG33 IN is solvent based, two components, very low viscosity epoxy system for enhancing color intensity of granite and other less porous stones.
  • It has deep penetration into granite
  • Available in four colors: transparent, red, brown and black
  • Curing Time at 30 deg C (Touch Dry): 1.5-2 hours
  • MIXING RATIO- 3 parts Resin and 1 part Hardener (pbw)
• Low Viscosity Epoxy for Colored Marbles
  • RachTR 1025 IN is solvent free, two components, low viscosity epoxy system for filling cracks and pinholes of colored natural stones in stone processing industries.
  • MIXING RATIO-100 pbw Resin and 25 pbw Hardener
  • COVERAGE-100- 250 Sq. ft. per kg depending on the porosity of surface
  • Curing Time (Touch Dry):
  • 250 C-500 C: 3-6 Hours

    150 C-250 C: 6-10 Hours

• Low viscosity Epoxy for Light coloured marbles
  • RachTR 1050 IN is solvent free, two components, low viscosity non yellowing epoxy system for filling cracks and pinholes of light colored natural stones in stone processing industries.
  • MIXING RATIO-100 pbw Resin and 50 pbw Hardener
  • COVERAGE-100- 250 Sq. ft. per kg depending on the porosity of surface
  • Curing Time (Touch Dry):
  • 250 C-500 C: 2-5Hours

    150 C-250 C: 5-10 Hours

• Low viscosity Epoxy for White marbles
  • RachTR 1033 IN is solvent free, two components, low viscosity epoxy system for filling cracks and pinholes of white natural stones in stone processing industries.
  • MIXING RATIO-100 pbw Resin and 33 pbw Hardener
  • COVERAGE-100- 250 Sq. ft. per kg depending on the porosity of surface
  • Curing Time (Touch Dry):
  • 250 C-500 C: 2-4Hours

    150 C-250 C: 4-8 Hours

IP Rights for All Products– With Bridgedots.
Commercialized – Yes.